Tailgates

For vans and vans we offer a wide range of tail lifts, Slider lifts, folding lifts and tail lifts for passenger transport.

Standard tail lifts

Standard tail lifts

A standard tail lift (capacities from 500 to 3000) is suitable for fast distribution of goods when delivered to small distances.

The platform is made of steel or aluminum. These types were developed for vehicles with a gross vehicle weight of 7.5 tones. Type "KS" is intended for vehicles such as Mercedes Sprinter with a narrower distance between the lift arms (500 mm). Type "KB" is a version (bodies wider than 2300 mm) for the vehicles with greater distance between the lifting arms (1320 mm).


Folding lifts

Folding lifts

Folding lifts are assembled under the vehicle bed from an inclined position, with the platform "broken" in about one-half, and placed on the lift arms. The advantage – with folded platform there is still free access for loading and unloading with forklift or from the loading ramp. The disadvantages is, that the towing device cannot be used and its use with insulated box superstructures is not recommended. Folding lifts manipulation is manual. Folding lifts are made of aluminum or a combination of steel (lift chassis), aluminum (platform) assembled and delivered in the load capacity of 1000 kg, 1250 kg and 1500 kg. Choice of 2 platform size (in unfolded position): 1200 or 1400 mm. Type "KF" with 2 lifting cylinders and 2 tilting cylinders or type "KFL" with 2 lifting cylinders and 2 compensation arms.


Slider lifts

Slider lifts

A complete extension and retraction under the vehicle frame are performed by hydraulic cylinders. An under-lift is made of aluminum or a combination of steel (lift chassis), aluminum (platform) assembled. The advantage of both types is that all types of superstructures can be used without problems, as well as with hitches. Access to the ramp is always free, also loading and unloading the vehicle.